top of page

SPECIFICATIONS

Please do not hesitate to contact us if you cannot find what you want

  • I'm a paragraph. Click here to add your own text and edit me. I’m a great place for you to tell a story and let your users know a little more about you.
     

  • I'm a paragraph. Click here to add your own text and edit me. It’s easy. Just click “Edit Text” or double click me to add your own content and make changes to the font. 
     

  • I'm a paragraph. Click here to add your own text and edit me. I’m a great place for you to tell a story and let your users know a little more about you.

IN-GROUND BOLLARDS

 

  • The Impact Recovery Rings are slipped over the top of the Internal Resistance core and secured using the clamp provided
     

  • The Resistance core (with Taper attached) is simply dropped into the ground socket automatically locking in using friction.
     

  • Bollard is simply slipped over the Rings and a securing stud is inserted (in a threaded hole near the base of the bollard, beneath the Impact Recovery Ring) preventing upward movement of bollard casing
     

  • To remove bollard. Remove stud near the base of the bollard using Allen key and repeat above in reverse. If badly impacted internal core may need replacing (Taper can be removed and re-used)

    TOOLS REQUIRED
     

  • Removal Tool required to remove internal core from ground socket. 
    (Foot tool option avaliable)

  • Screwdriver is required to tighten clamps

  • Allen key to remove bollard casing

IMPACT RECOVERY SYSTEM

IN-GROUND BOLLARDS

 

  • The Impact Recovery Rings are slipped over the top of the Internal Resistance core and secured using the clamp provided
     

  • The Resistance core (with Taper attached) is simply dropped into the ground socket automatically locking in using friction.
     

  • Bollard is simply slipped over the Rings and a securing stud is inserted (in a threaded hole near the base of the bollard, beneath the Impact Recovery Ring) preventing upward movement of bollard casing
     

  • To remove bollard. Remove stud near the base of the bollard using Allen key and repeat above in reverse. If badly impacted internal core may need replacing (Taper can be removed and re-used)

    TOOLS REQUIRED
     

  • Removal Tool required to remove internal core from ground socket. 
    (Foot tool option avaliable)

  • Screwdriver is required to tighten clamps

  • Allen key to remove bollard casing

SURFACE MOUNT BOLLARDS

 

  • The Impact Recovery Rings are slipped over the top of the Internal Resistance core and secured using the clamp provided
     

  • The internal Resistance core is fitted over the upright spigot and secured using a securing stud (provided) 
     

  • Bollard is simply slipped over the Rings and a securing stud is inserted (in a threaded hole near the base of the bollard) sitting, beneath the Impact Recovery Ring, preventing upward movement of bollard casing
     

  • To remove bollard. Remove stud near the base of the bollard using Allen key and repeat above in reverse. If badly impacted internal core may need replacing 

    TOOLS REQUIRED
     

  • Allen key required to remove internal core from base plate

  • Screwdriver is required to tighten clamps

  • Allen key to remove bollard casing

  • I'm a paragraph. Click here to add your own text and edit me. I’m a great place for you to tell a story and let your users know a little more about you.
     

  • I'm a paragraph. Click here to add your own text and edit me. It’s easy. Just click “Edit Text” or double click me to add your own content and make changes to the font. 

Bollards..jpeg
bottom of page