top of page
ZWIRS.png

STEP 1 Select your bollard design

STEP 2 : Select the foundation

 

1.SELECT BOLLARD

 Select your bollard design. Steel powder coated, Stainless steel (pipe) heavy duty or Advanced Polymer (non conductive, won't rust, dent or chip (Western Power Approved)

Standard units are Safety Yellow but can be made in other colours (min 6 )

Australian Standards recommends 1500 mm Height for greater visibility (less damage) 

STEEL BOLLARDS

Suitable for Disabled Bay Bollards

STAINLESS STEEL BOLLARDS

 ADVANCED POLYMER BOLLARDS

AP_Bollard.jpg

Suitable for Disabled Bay Bollards

STEP 2. SELECT FOOTING

Choose to install your bollard In-ground (removable) 350 mm or 650 mm Depth. 

350 mm is sufficient for most applications (as the rings take the brunt of the impact force) unless bollard may be subject to severe impact from trucks/ large vehicles (then we  suggest installing foundation to 650 mm depth)

Surface Mount must be installed in substantial concrete footing using 5 evenly spaced concrete anchors. 

350 MM IMPACT RECOVERY

650 MM IMPACT RECOVERY SYSTEM

 SMOUNT IMPACT RECOVERY SYSTEM

“ Our selection is not based on price alone, we also took into consideration the safety and saving aspects. ZERO WASTE Foundations allow quick replacement of items with no further effort required to the base, (providing a significant cost benefit in replacing the damaged item by re-using the existing footing) and reduces risk of injury to employees by reducing time spent on traffic islands exposed to traffic.” 

MAIN ROADS DEPT W.A.

ZWUF_yellow.png

Using ZERO WASTE Unbreakable Foundations, Australia’s market leaders are now building superior developments that remain in pristine condition for decades

Buy once and reuse for a lifetime.
ZERO damage to asphalt, paving and concrete foundations, ZERO on-going repairs

INNOVATION 1: 
The ultimate protection
for expensive footings

units_clear.gif

INNOVATOR OF THE YEAR

At last sustainability makes good business sense

Built in obsolescence is standard practice - but we decided it's time to put an end to this madness.

 

Previously only used in the Aerospace industry, we have utilised the latest in self-healing plastics and advanced manufacturing methods to  produce a range of quality low cost solutions that continue working year after year, saving you thousands over the life of a development

AVAILABLE NATIONALLY

Smart Distributors

You can order any of our products from all major distributors of traffic and civil supplies Australia wide. If you have a preferred supplier not on our list- please don't hesitate to contact us on 08 9248 5545 to add them to our suppliers  list or email hello@zerocivil.com

G&B LOGO.png
remote_civils.png
Corsign copy.gif
deneefe black.gif
jasons copy.gif
bottom of page